ZugDCC for Lenz XpressNet DCC

SECURE online ordering via PayPal.

It's come to my attention that some search engines are linking to sub-sections of this site and not the correct main page making some sections unavailable to visitors.

If you do not see a frame with links to the left click here .
You should also do this after translating this page with Bable Fish

ZugDCC, is a easy to use DCC Control program to operate Lenz XpressNet DCC systems through the Lenz LI100, LI101F and LI-USB computer interface.

ZugDCC is Shareware . This means you can try it for a month before you pay for it. See the order page (use link on menu bar to the left) for current price. When you register (buy) ZugDCC your PassKey® will be sent by email.

Customer Quotes:

I’ve tried the **** software but I find the ZugDCC software to be easier to use.
-Curtis
(* name of competing software removed)

I've tried some of the other software and they're just not as good as your system. Some of them take a bit of time to get them to work.
-Chris

The software is the most brilliant piece of software for running a model rail. I use it all the time with Lenz equipment.
-Alan

I am very impressed by the software – congratulations on what you have written.
-Colin

Why you should choose ZugDCC:
    I designed ZugDCC from the ground up to be easy to set up and use. You do not need any programing experience to run my software, there is no huge learning curve to stand in your way to get running your trains within a few minutes of installing it. It's simple enough to be easy to use, yet powerful enough to use for complex yard or operation tasks.   Your hobby is to run model trains, not learning complex commands.
    You my notice I say "I" because ZugDCC, and all my other programs, are completely my own original creations. It's not a bunch of sections of code put together by various people like a software Frankenstein, it is a creation of a single person, with the main focus on easy of use and functionality and of course reliability.
    You don't need a super powerful computer to run ZugDCC either. I am a tight programmer, any PC the can run Windows 98SE or newer should have no problems running my software. In fact I use older computers to develop my software on to be sure it will operate on them. Most of the code has been done on either my 366MHz Pentium 2 laptop, or my 600MHz Pentium 3 system, and it runs well on them both!
    If you ever do need help with my software, I'm just an email away. And who better to get help from then the one person that created the entire program!

Features:

Works with XpressNet only for better compatibility.
Supports the fast 19200 baud connection of the Lenz LI100F and LI101F.
NEW: Support for LR101 feedback modules with map display and text read-outs for block detection.
Supports the LI-USB.
Easy Add-to and Remove-from MU consists.
NEW: Easy Map placement and moves of stationary decoder and feedback unit with on the fly description editing added.
Support for CV1 through CV256.
Locomotive database for fast and easy selection.
When you select a locomotive in a MU you control Functions on that locomotive but the speed and direction of the whole consist.
Operates in 14, 27, 28 and 128 step modes.
All programming modes are supported, including Program on Main (PoM)
Lenz Compact and Atlas Commander do not support programming from other devices.
Easy 2 and 4 digit address programming.
Displays CV values in decimal, hex and binary at the same time.
Edit and write CV values in decimal, hex or binary.
NEW: EASY SPEED TABLE READING and PROGRAMING!
Easy Basic CV Reading and Programming.
NEW: Momentary F-Key options for all F-Keys.
Simple setup.
8 on screen throttles. (limited to 2 in trial mode)
Control F0 through F12 on each throttle.
Customizable F button captions. Hides buttons with no caption.
Selectable F key to be shown.
Accessory control.
Clickable Turnout Map.
Turnout / accessory decoder routing.
Scale & Metric calculator.
NO Spyware, MalWare, or Ads! I make money by selling my software, not invading people's computers like many "free" programs do.
more coming....

Program features, page content and subject to change without notice!
Last web site update: October 25 2009.